ショッピングカート:
カート内商品数 0 アイテム
 

AlienWhoop F4 Brushed Flight Controller (V2.1)

6,590円

AlienWhoop F4 Brushed Flight Controller (V2.1)  

AlianWhoop製の最新F4フライトコントローラー 
V2.1にバージョンアップ!
FutabaのS-busなども使用できるようになりました!
ARM Cortex-M4 core F4 168 MHz CPU搭載!
32kHz対応のハイレスポンス!
Beta Flightがプリインストールされています
ブザーポート付

【詳細】

AlienWhoop flight controller for Tiny Whoop, Blade Inductrix, Eachine, BetaFPV, and other micro brushed quadcopter frames. Best in class flight controller running BetaFlight 3.2 release candidate (upgradable).

 
  • Choice of the top performing ARM processors:
    • High-performance ST Microelectronics ARM Cortex-M4 core F4 168 MHz CPU
    • High-performance ST Microelectronics ARM Cortex-M7 core F7 216 MHz CPU
    • Highest-performer ST Microelectronics ARM Cortex-M4 core F4 OVERCLOCKED to 240 MHz!!
  • Choice of top performing motion processors:
    • Invensense MPU-6500 Six-Axis (Gyro + Accelerometer) low power consumption MEMS MotionTracking™ Device
    • Invensense MPU-9250 Nine-Axis (Gyro + Accelerometer + Compass) low power consumption MEMS MotionTracking™ Device
  • Latest BetaFlight firmware running the ALIENWHOOPF4 or ALIENWHOOPF7 target. Capable of 32kHz gyro sampling and 32kHz PID loop with overclocked F4 in BetaFlight 3.2 (32kHz gyro sampling rate might not be optimal depending on features selected 16/16 or 16/8 might be preferable).
  • Extreme power. Choice of either (1) Fairchild Semiconductor FDMA410NZ MOSFET with 9.5A continuous and 24A burst brushed motor insanity (8.5mm coreless scream), (2) FDMA410NZT MOSFET with 9.5A continuous and 63A burst, or (3) Infineon Technologies IRFHS8342 MOSFET up to 75A pulsed!!
  • UART4 solder pads for programmable LED strip (SUPER COOL) using WS2812B RGB or RX/TX for Micro MinimOSD
  • Supports most serial external receivers. Officially supporting FrSky XM and XM+ (SBUS), LemonRX DSM2 and DSMX (SBUS), and FlySky FS-A8S (iBUS) satellites
Hardwear
MCU: STM32F405RGT6 or STM32F722RET6
Brushed Motor Mosfets: Fairchild Semiconductor FDMA410NZ (9.5A/23A pulsed), FDMA410NZT (9.5A/63A pulsed), or Infineon IRFHS8342 MOSFET up to 75A pulsed
IMU: MPU-6500 or MPU-9250 (both SPI)
BARO: N/A
USB: STM32 VCP
Hardware UARTS: UART4 solder pads for Micro MinimOSD, LED strip, etc.
OSD: N/A
Blackbox: N/A
PPM/UART Shared: N/A
Battery Voltage Sensor: N/A
Current sensor: N/A
Integrated Voltage Regulator: 3.3V
Buttons: 2 jumpers (1: DFU, 2:Receiver Bind)

AlienWhoop Board INFO
 

Description: 
CPU: STM32F405
Six-Axis: MPU6500
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern

Firmware version: Betaflight ALIENWHOOPF4 3.2.0 

Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector

Weight: 3.5g

Package Include:

1 * Alienwhoop F4 brushed flight controller V2
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
1 * 55mm PH-JST 1.25 power cable pigtai

カートに入れる:

  • モデル: AW-F4-21
  • 重量: 0.1kg
  • 8 在庫量



この商品は2018年06月11日(月)に登録されました。