ショッピングカート:
カート内商品数 0 アイテム
 

GEP-CineRun HD3 DJI Air Unit for CineWhoop HD FPV 完成機

46,900円

GEP-CineRun HD3 DJI Air Unit for CineWhoop HD FPV  完成機 

DJIのデジタルFPVシステムを搭載した3インチシネマドローン!
GoPROマウント付でスムーズな映像を録画可能です!
プロペラガードが装着され、墜落や衝突時のダメージに強く、安心して撮影が出来ます
F7搭載で35AのESCで余裕のスペック!
大きめのバッテリーも搭載できるので長時間フライトも可能です

DJI Digital Air Unitが搭載された完成機です

※GoPROマウントが付属します

※4セル仕様・・・推奨4S750〜4S850mAh

Features:

No Propellers in the view. Perfect for DJI FPV HD(720p 120fps FPV) Equipped with a 3-inch guard frame, Ensure safety and reliability Full 3K Carbon Fiber System:STABLE PRO F7 35A Black Box: 32Mb onboard flash memory. Full Soft Mounted FC System: Provides a clean operating environment for gyro. Exquisite Assembly Process: Eliminate any potential installation problems. Weight:203g(without battery and GoPro Mounts TPU) Specification: Model Name: CineQueen 4K SYSTEM:STABLE V2 F4 30A Camera:Runcam Hybrid 4K Motor:GEP-GR1206 3600KV Propeller:3inch 3-blade VTX 5.8G 500mW Antenna:Momoda 5.8G RHCP Input Battery: 3-4S(4S 650mAh – 4S 850mAh) Receiver option:Frsky XM+ / Frsky R-XSR / TBS NanoRX / FlySky A8SV2 Weight:156g(without battery)
Specifications: Frame: Full 3K Carbon Fiber Side plate : 1.5mm Top plate : 2mm Bottom plate : 3mm Side plate : 2mm Wheelbase : 155mm Motors: GR1404 3850KV Recommended Battery:4S 850mAh (No inclued) Recommended Camera:GoPro Hero 7/8(No inclued) FPV SYSTEM : DJI FPV Air Unit Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Min. Latency (end-to-end) Low Latency Mode (720p/120fps): <28 ms High-Quality Mode (720p/60fps): <40 ms Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot Operating Temperature Range: 32° to 104°F (0° to 40°C) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2” CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 × 21.1 × 20.1 mm Electronic System(STABLE PRO F7 35A): STABLE PRO F7 Flight Controller Specs: Model:STABLE PRO F7 35A MCU: STM32F722RET6 IMU: 2x ICM20689(SPI) BlackBox: 32Mb onboard Flash OSD: BetaFlight OSD w/ AT7456E chip Baro:NO BEC Output: 5V@3A Integrated LC Filter Input Voltage: 2-6S Lipo Firmware target: EXF722DUAL Size: 26x26mm board, 20mm mounting holes (M2) STABLE PRO F7 ESC BL32 2-6S 4in1 Specs: MCU:STM32F051 Constant:35Amps Burst:45Amps Dimensions:31*31mm(including the power pads) Mounting Holes:20*20mm,M2 Supports Dshot1200,Proshot,Oneshot,Multishot Current meter: Yes Target: GEPRC-BL32-4IN1


カートに入れる:

  • モデル: GEP-CINERUN-DJI
  • 重量: 0.4kg
  • 3 在庫量




この商品は2020年04月21日(火)に登録されました。