ショッピングカート:
カート内商品数 0 アイテム
 

Beta85X 4K-DVR Whoop Quadcopter FPV S-FHSS(4S) 完成機 ※入荷

32,500円

Beta85X 4K-DVR Whoop Quadcopter FPV S-FHSS(4S) 完成機  ※入荷

待望の4K30fps
撮影が可能となったマイクロドローン!
85XからFCとESC、モーターなどが変更となり4セル仕様!
フレームには補強用のカーボンプレートが追加となり、よりリニアなフライトが可能となりました!
コンデンサー付きバッテリーコネクターでより安全性が向上!1080P60fpsで録画できるハイビジョンカメラ搭載!
1105-5000kv+16AのD-SHOT1200対応ESCと4セルリポバッテリーでレーシングドローンと変わらないフライトが可能です!

F4フライトコントローラーに、カメラはCADDXのTarsier4Kでとても鮮明!
VTXも200mWまで切り替えが可能!
OSD付きでプロポ操作でPIDなど設定可能!

※S-FHSS受信機付(Frskyも可)
※オリジナルデータのフライト調整済み(プロポセッティング取説付き)
※プロップウォッシュ対策済み

フリップオーバー仕様(起き上がり)
※スイッチ操作で裏向いても起き上がれます

BULLET POINT
F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.
High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable.
Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
Installed with Caddx Tarsier 4K camera with ND8 fliter which supports APP setting and switchable resolution setting of 4K, 2.7k, 1440P, 1080P.
Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.
For 85mm brushless whoop drones, there are 3 versions for your choice - Beta85X FPV, Beta85X HD and Beta85X 4K. 
【仕様】
Weight: 88.6g (without battery)
F4 V2 4S Flight Controller
16A BLHeli_32 ESC
Motors: 1105 5000KV with connector
Props: 2" 4-Blades Props
Camera: CADDX Tarsier 4K
Canopy: Canopy for Beta85X 4K Version
Receiver option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire / PNP
Recommend battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Flight time: 4min - 6min with 450mAh 4S battery

【FC仕様】

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD(OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
 
【ESC仕様】
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66

 
【Camera 仕様】
Find more details about this Caddx Tarsier 4K camera in another page.
Weight: 19.5g
FOV: 4KF 2.8, FOV 150°(16/9), FPV FOV 165°(4/3)
Lens: Dual lens 2.8 / 12Mega
Image Sensor: 12M SONY sensor
TV System: NTSC / PAL, can be changed
Anti-Shake: Hardware anti-shake
Scene Mode: Auto / Personage / Scenery / Defog
Recording Timing Larm: OFF / 1mins / 3mins / 5mins / 10mins
Horizontal Resolution: 1200TVL
Image: 16:9 / 4: 3 (changeable)
Camera OSD: Seperate OSD
The camera tilt angle is switchable from 20 degree to 30 degree with ND8 fliter.

【セット内容】
1x Beta85X 4K Whoop Quadcopter(4S)( S-FHSS+D16 RX)
1x ND8 Fliter for Tarsier 4K camera
1x OSD Menu Board

推奨バッテリー
Gens Ace Tattu Lipo 4S 450mAh(75C) Long


カートに入れる:

  • モデル: Beta85X-hd-4k
  • 重量: 0.3kg
  • 10 在庫量







この商品は2019年06月26日(水)に登録されました。