ショッピングカート:
カート内商品数 0 アイテム
 

Beta85X HD-DVR Whoop Quadcopter FPV S-FHSS(4S) 完成機

25,600円

Beta85X HD-DVR Whoop Quadcopter FPV S-FHSS(4S) 完成機 

FCとESC、モーターなどが変更となり4セル仕様となった85X-HD!
フレームには補強用のカーボンプレートが追加となり、よりリニアなフライトが可能となりました!
コンデンサー付きバッテリーコネクターでより安全性が向上!
1080P60fpsで録画できるハイビジョンカメラ搭載!
1105-5000kv+16AのD-SHOT1200対応ESCと4セルリポバッテリーでレーシングドローンと変わらないフライトが可能です!

F4フライトコントローラーに、カメラはCADDXのTurtle V2でとても鮮明!
VTXも200mWまで切り替えが可能!
OSD付きでプロポ操作でPIDなど設定可能!

※S-FHSS受信機付(Frskyも可)
※オリジナルデータのフライト調整済み(プロポセッティング取説付き)
※プロップウォッシュ対策済み

フリップオーバー仕様(起き上がり)
※スイッチ操作で裏向いても起き上がれます

BULLET POINT
Beta85X pushes the new era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with HD camera on 4S power.
With the high performance STM32F051 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD) , faster input signals with lower latency and higher update rate are reachable, give you much more power.
Comes with upgraded F4 V2 4S FC, this FC is equipped with ports which support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.
Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed to support 4S. Motor comes with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

【仕様】
Weight: 78g (without battery)
F4 V2 4S Flight Controller
16A BLHeli_32 ESC
Motors: 1105 5000KV with connector
Props: EMAX Avan 2" 4-Blades Props
FPV Camera: Customized EOS2 Camera
FPV Canopy: Canopy for EOS2 Camera
Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Beta85X Frame Kit
Carbon Fiber Stiffener Brace for Beta85X Frame
Battery strap fits for micro 2S-4S battery
Flight time: 4min - 6min with 450mAh 4S battery (smooth flight in a windless environment)

【FC仕様】
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD(OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
 
【ESC仕様】
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
 
HD Camera and Z02 VTX
The primary purpose of the Beta85X drone is for a cinematic whoop drone. Many polits revamp their Beta75X to HD whoop drone--They add a HD DVR camera on Beta75X drone to get high defination and beautiful flying footage and video. Inspired by this, we want to provide a BNF whoop drone with HD DVR camera by default so that pilot do not need to assemble it by hand and also get more power on punch for acro mode.
 
Output power: 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Customized ZRC antenna
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Caddx Turtle V2 Camera
TV System: NTSC
Field of view: 100-120 degrees with 1/3 lens

 
【セット内容】
1x Beta85X BNF 4S Whoop Quadcopter (HD DVR, SFHSS RX)
1x OSD Menu Board

推奨バッテリー
Gens Ace Tattu Lipo 4S 450mAh(75C) Long



カートに入れる:

  • モデル: Beta85X-hd-4s
  • 重量: 0.3kg
  • 6 在庫量





この商品は2019年06月25日(火)に登録されました。