GEP-CineRun HD3 DJI Air Unit for CineWhoop HD FPV 完成機
DJIのデジタルFPVシステムを搭載した3インチシネマドローン！
GoPROマウント付でスムーズな映像を録画可能です！
プロペラガードが装着され、墜落や衝突時のダメージに強く、安心して撮影が出来ます
F7搭載で35AのESCで余裕のスペック！
大きめのバッテリーも搭載できるので長時間フライトも可能です
DJI Digital Air Unitが搭載された完成機です
※GoPROマウントが付属します
※4セル仕様・・・推奨4S750〜4S850mAh
Features:
No Propellers in the view.
Perfect for DJI FPV HD(720p 120fps FPV)
Equipped with a 3-inch guard frame, Ensure safety and reliability
Full 3K Carbon Fiber
System:STABLE PRO F7 35A
Black Box: 32Mb onboard flash memory.
Full Soft Mounted FC System: Provides a clean operating environment for gyro.
Exquisite Assembly Process: Eliminate any potential installation problems.
Weight:203g(without battery and GoPro Mounts TPU)
Specification:
Model Name: CineQueen 4K
SYSTEM:STABLE V2 F4 30A
Camera:Runcam Hybrid 4K
Motor:GEP-GR1206 3600KV
Propeller:3inch 3-blade
VTX 5.8G 500mW
Antenna:Momoda 5.8G RHCP
Input Battery: 3-4S(4S 650mAh – 4S 850mAh)
Receiver option：Frsky XM+ / Frsky R-XSR / TBS NanoRX / FlySky A8SV2
Weight:156g(without battery)
Specifications:
Frame:
Full 3K Carbon Fiber
Side plate : 1.5mm
Top plate : 2mm
Bottom plate : 3mm
Side plate : 2mm
Wheelbase : 155mm
Motors: GR1404 3850KV
Recommended Battery：4S 850mAh (No inclued)
Recommended Camera：GoPro Hero 7/8(No inclued)
FPV SYSTEM : DJI FPV Air Unit
Operating Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
Min. Latency (end-to-end)
Low Latency Mode (720p/120fps): <28 ms
High-Quality Mode (720p/60fps): <40 ms
Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-17.6 V, about 4-9 W
Sensor: 1/3.2” CMOS; Effective Pixels: 4 M
Lens: 2.1 mm, f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150°(D); 122°(H); 93°(V)
Dimension: 22.1 × 21.1 × 20.1 mm
Electronic System(STABLE PRO F7 35A):
STABLE PRO F7 Flight Controller Specs：
Model:STABLE PRO F7 35A
MCU: STM32F722RET6
IMU: 2x ICM20689(SPI)
BlackBox: 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
BEC Output: 5V@3A
Integrated LC Filter
Input Voltage: 2-6S Lipo
Firmware target: EXF722DUAL
Size: 26x26mm board, 20mm mounting holes (M2)
STABLE PRO F7 ESC BL32 2-6S 4in1 Specs：
MCU:STM32F051
Constant:35Amps
Burst:45Amps
Dimensions:31*31mm(including the power pads)
Mounting Holes:20*20mm,M2
Supports Dshot1200,Proshot,Oneshot,Multishot
Current meter: Yes
Target: GEPRC-BL32-4IN1
